This will be enhanced, added to, etc. when I get the lights and then it will be moved to BentRiderOnline.com . At this moment, the prime contenders are: for the front, the B&M Lumotec IQ Premium Cyo T Senso Plus, part # B&M1752QTSNDi. For the rear, I am considering both the Toplight View Plus Brake Tec, Part # B&M321ASKV-02 and the Toplight View Plus, Part # B&M321ASK-02. Your advice, suggestions and price will play a large part in which gets put on the Sprint.
In the pictures below, you can see the mount for the front light, at the front of the trike. To attach the light to it, I would think the Schmidt aluminum milled tall mount for handlebars up to 31.8mm, black Part#: SCH75534would be a good choice. For the rear, we have choices again. Attached to the mount for the head rest is a round tail light mount. That might be a good place, but since the seat does come off when folding the trike, then the rear wire would need to have some disconnects in it. That might not be a bad idea, even if the rear light is mounted in the other option, the vertical light mount holes at the rear of the rack. I’ve included two pictures, one showing the measurements in inches, and the other in metric. (I had to include the latter, since I just happen to have a tape measure that’s metric!) And speaking of measurements, included also are pictures of the distance from the dynamo cable to the boom, and from there to the front light mount.